Portable Monitor Rev3.0 | Sebastiaan Bouwmeester
Zandvoort / Netherlands / 2023
0
So normally I do everything with CNC but these cabinets I made 12 years ago and they just needed a new baffel for a new speaker configuration. so everything was done by hand this time.
And also to test the new DSP I found for only 22,- EURO a piece! 🤓🤟
The TSA1701 Audio DSP Board:
https://www.tinyosshop.com/tsa1701
The cabinbets now have a Monacor RBT-1000 6Ω ribbon Tweeter for the HF,
and 2pieces Faital PRO 6FE100-8 (8Ω) for the LF
Crossover done with the TSA1701 Audio DSP Board at 3000Hz
Cabinet is about 14 Liters and I used 2x JANTZEN AUDIO bass-reflex tube L185mm Ø50mm.
Amplification is the WONDOM AA-AB32191 ~ 2x300 Watt 4Ohm Class D Amp - TAS5630B with a 350W MeanWell powersupply.
Going to use them as DJ-monitor or as portable speakers for music during work.
0 users love this project
Enlarge image
So normally I do everything with CNC but these cabinets I made 12 years ago and they just needed a new baffel for a new speaker configuration. so everything was done by hand this time.And also to test the new DSP I found for only 22,- EURO a piece! 🤓🤟The TSA1701 Audio DSP Board:https://www.tinyosshop.com/tsa1701The cabinbets now have a Monacor RBT-1000 6Ω ribbon Tweeter for the HF,and 2pieces Faital PRO 6FE100-8 (8Ω) for the LFCrossover done with the TSA1701 Audio DSP Board at...
- Year 2023
- Work started in 2010
- Work finished in 2023
- Status Completed works
- Type Multi-purpose Cultural Centres / Theatres / Concert Halls / Bars/Cafés / Custom Furniture / Music schools/Music academies / Dance academies / Product design / self-production design
comment