House with flown pool in Valencia | Casas inHAUS

Custom home with precast concrete pool Valencia / Spain

8
8 Love 1,017 Visits Published

This is a different prefabricated house in Valencia. 100% personalized to the taste of its owners. This architect's house, designed practically to measure, although inspired by various models in the inHAUS catalogue, ends up creating a magical ensemble. It consists of two floors that make up a cantilever (upper floor) over another cantilever (lower floor) that is perched on the rough ground.


The technical difficulty involved in creating this set of volumes almost floating in the air was overcome by the inHAUS LAB design team and the benefits and features that only the EMOHA modular construction system offers.


Finally, the naturalness with which the technical challenges were resolved almost made another fundamental milestone almost anecdotal: the installation of a completely prefabricated concrete pool, which was implanted the same morning as the house. A structure with a cantilever of almost 9 meters and weighing 15 tons that adds personality to the complex.


Established in a residential area near Valencia, this house was mainly the La Cañada model. But with multiple modifications. What makes it somewhat peculiar are the touches of colorful exterior. Cheerful tones reminiscent of the motifs of Mexican celebrations, at the express wish of their owners.


Of 249 m2 built on two floors. And with another very important novelty. Casas inHAUS has already installed two prefabricated pools in two of its latest houses. But this time the pool has been self-made. Made of concrete, 100% with inHAUS technology. A large pool 12 meters long, supported by powerful pillars. As if it were suspended in the air. An 'infinity' pool, with views towards the horizon. Casas inHAUS does not do projects of just a pool; but it does offer different pool options with its houses that complete a comprehensive service. Different solutions for the most demanding customer.


A large kitchen-living-dining room leads to an L-shaped terrace and the pool. All this is located at the level of the street and the main entrance, on a plot with a very steep slope.


Such a peculiar plot ends up significantly affecting the house. It is accessed through the upper part of the land, to; via a walkway to the front door. You enter, therefore, through the first floor. And this first floor houses the day area (kitchen, dining room and living room), as well as the master suite. From this height you can access the pool and the terraces.


The lower floor, located in the lower part of the sloping plot, has the rest of the bedrooms and rooms, such as a laundry room and a second room dedicated to leisure and games.


This O-shaped house sits on a 1,800-meter plot, featuring an impressive grove. The kitchen and living-dining room area totals 55 square meters, while the master bedroom, plus its bathroom and large dressing room, occupies 32 square meters. Thus, the day area has 99 square meters, including a hall, toilet and pantry.


The ground floor, for its part, is composed of 103 square meters, for another three bedrooms and bathrooms, living room-staircase (30 meters), study, storage room and gallery-laundry. Thus, this prefabricated house in Valencia is completed by more than 40 meters and a pool with almost 30 square meters of water sheet.


 


[ES]
Casa con piscina volada en Valencia


Esta es una casa prefabricada en Valencia diferente. Personalizada al 100 % al gusto de sus propietarios. Esta casa de arquitecto, diseñada prácticamente a medida, aunque inspirada en varios modelos del catálogo de inHAUS, acaba cuajando un conjunto mágico. Se trata de dos plantas que conforman un voladizo (piso superior) sobre otro voladizo (planta inferior) que está posado sobre el encrespado terreno.


La dificultad técnica que suponía crear este conjunto de volúmenes casi flotando en el aire fue superada por el equipo de diseño de inHAUS LAB y las bondades y prestaciones que solo ofrece el sistema modular constructivo EMOHA.


Finalmente, la naturalidad con la que se resolvieron los desafíos técnicos casi convierten en anecdótico otro hito fundamental: la instalación de una piscina de hormigón, totalmente prefabricada, que fue implantada en la misma mañana que la casa. Una estructura con casi 9 metros de voladizo y 15 toneladas de peso que aporta personalidad al conjunto.


Implantada en una zona residencial cercana a Valencia, esta vivienda respondía principalmente al modelo La Cañada. Pero con múltiples modificaciones. Lo que la hace un tanto peculiar son los toques de colorido exterior. Alegres tonalidades que recuerdan a los motivos de las celebraciones mexicanas, por expreso deseo de sus dueños.


De 249 m2 construidos sobre dos plantas. Y con otra novedad importantísima. Casas inHAUS ya ha instalado dos piscinas prefabricadas en dos de sus últimas casas. Pero esta vez la piscina ha sido de fabricación propia. Hecha de hormigón, 100 % con la tecnología inHAUS. Una gran piscina de 12 metros de largo, apoyada en poderosos pilares. Como si estuviera suspendida en el aire. Una piscina de tipo ‘infinity’, con vistas hacia el horizonte. Casas inHAUS no hace proyectos de solo una piscina; pero sí ofrece con sus casas diferentes opciones de piscina que completen un servicio integral. Diferentes soluciones para el cliente más exigente.


Una gran sala de cocina-salón-comedor da paso a una terraza con forma de L y a la piscina. Todo esto se sitúa a la altura de la calle y la entrada principal, en una parcela con una pendiente muy pronunciada. 


Una parcela tan peculiar acaba por afectar notablemente a la casa. Se accede por la parte superior del terreno, a; a través de una pasarela hacia la puerta principal. Se entra, por tanto, por la planta primera. Y este primer piso alberga la zona de día (cocina, comedor y salón), además de la suite principal. Por esta altura se accede a la piscina y las terrazas.


La planta inferior, situada en la parte baja de la parcela en pendiente, cuenta con el resto de dormitorios y estancias, como un lavadero y un segundo salón dedicado a ocio y juegos.


Sobre una parcela de 1.800 metros, protagonizada por una imponente arboleda, se asienta esta casa con forma de O. La zona de la cocina y el salón-comedor suma 55 metros cuadrados, mientras que el conjunto del dormitorio principal, más su baño y su amplio vestidor, ocupa 32 metros cuadrados. Así la zona de día cuenta con 99 metros cuadrados, al incluir ‘hall’, aseo y despensa. 


La planta baja, por su parte está compuesta por 103 metros cuadrados, para otros tres dormitorios y baños, sala de estar-escalera (30 metros), estudio, trastero y galería-lavandería. Así,esta casa prefabricada en Valencia es completada por más de 40 metros y una piscina con casi 30 metros cuadrados de lámina de agua.


 


Location: Valencia (España)


Año: 2019


Área: 249m2


Arquitecto: Casas inHAUS


Constructor: Casas inHAUS


Fotografía: Adrián Mora 


Vídeo: Jesus Orrico


 


 


 

8 users love this project
Comments
    comment
    user
    Enlarge image

    This is a different prefabricated house in Valencia. 100% personalized to the taste of its owners. This architect's house, designed practically to measure, although inspired by various models in the inHAUS catalogue, ends up creating a magical ensemble. It consists of two floors that make up a cantilever (upper floor) over another cantilever (lower floor) that is perched on the rough ground. The technical difficulty involved in creating this set of volumes almost floating in the air was...

    Archilovers On Instagram
    Lovers 8 users