Adobe buble hata

5
5 Love 660 Visits Published

Construction technology: To implement the project, we need flexible (rubber) ball 12 meters in diameter about. It is filled with water, forming a kind of drop-like shape. Height fix arcuate board, which ends short. This board is the main buttress element. Then on this form applied with a thin (10-15cm) layer of a mixture of clay and straw (adobe) with polypropylene mesh reinforcement. Maybe add a water glass, I'm not sure, but you need to experiment. We give the first coat to dry. Then laid with rough branches reinforcing material or something like that and fill it with a thicker layer of adobe. When this structure is dry, the water drained out of the ball, the ball is pulled, and the design dries. The upper layer, again, pour a layer of clay with liquid glass and armiruem polypropylene mesh. Drop-shaped, dome-shaped molded form itself is very strong, but for extra strength reinforced dome sostoyaschaey buttress wall of planks and sticks - wedges. Through its "shaped louver" form - it will pass into the interior of the light of day. From the inside, the wall will be mounted glass or polypropylene film. At the top of the house is set, designed by me, a solar collector, which rotates in a circle. One revolution is equal to 24 hours, thus easier to manage a reflector, and he bude always focused to the sun, and provides maximum collection of solar energy. The solar collector will heat the coolant up to 300 degrees Celsius. The microcontroller will control the movement and distribution of fluid between the cooking stove, water heater and solar concentrator. And yourself coolant pipes will heat the air, creating a craving air flow and thus air circulation in the room. Internal space is organized so as to minimize the use of sewer, water pipes.

5 users love this project
Comments
    comment
    Enlarge image

    Construction technology: To implement the project, we need flexible (rubber) ball 12 meters in diameter about. It is filled with water, forming a kind of drop-like shape. Height fix arcuate board, which ends short. This board is the main buttress element. Then on this form applied with a thin (10-15cm) layer of a mixture of clay and straw (adobe) with polypropylene mesh reinforcement. Maybe add a water glass, I'm not sure, but you need to experiment. We give the first coat to dry. Then laid...

    Project details
    • Status Competition works
    Archilovers On Instagram
    Lovers 5 users