Some DIY And Professional Pool Repairs In Melbourne For Common Issues

by Chris Rhodes
0

You love your swimming pool, so if it starts experiencing an issue we’re sure that you want to get it rectified as quickly as possible. Many people, however, struggle to determine whether they can troubleshoot the issue themselves or whether they need to call in the professionals. In this article, we have outlined some of the more common issues that arise and how you can go about obtaining the right sort of pool repair in Melbourne (either DIY or professional).

Low Filter Pressure & No Water Movement

If you have noticed that your filter has low pressure and that there is no water movement whatsoever, there are a few things you can try. Check the baskets and empty them if required. Check the water level and add water if it’s low. If this still doesn’t fix the issue, you will need to call in a professional. The weir skimmer blade could be stuck in the “up” position or there could be an air leak on the suction side of the pump.

Pump Motor Is Overly Loud
If you have noticed that your pump’s motor is quite loud, the pressure side of the plumbing could actually be closed – you should check the valves for the proper settings. If this doesn’t rectify the issue, you will need to call in a professional. The bearings in the motor could be on their way out or the pump impeller could be clogged. A professional will be able to determine the issue and repair it.

Pool Light Fails To Come On
If you have noticed that your pool lights are failing to come on when they’re supposed to, there are a few things you can try. Check the circuit breaker and check the GFCI outlet; reset if required. If this doesn’t rectify the issue, you will need to call in a professional. If the light has been tied into a computer system, the power relay may need to be replaced. This is quite an extensive pool repair in Melbourne.

Pump Has A Leak
If you have noticed that your pump has a leak, there are a few things you can try. Remove, clean and reseat the O-ring. Secure the pump lid (you would be surprised how often this is source of leaks). If this doesn’t rectify the issue, you will need to call in a professional. There could be a leak in the plumbing that needs to be repaired, and this is far too complex for the everyday homeowner to tackle.

Filter Has A Leak
If you have noticed that your filter has a leak, you should try tightening or even replacing the air relief valve. If this doesn’t rectify the issue, you will need to call in a professional. The O-ring might be damaged and need to be replaced, or there could be a leak in the plumbing that needs to be repaired. Both of these repairs are far too complex for the everyday homeowner, so should never be attempted.

We hope that the information provided in this article has given you a better understanding of when you need professional pool repairs in Melbourne and when you can handle the issue yourself. It is important to keep in mind that if you don’t feel comfortable doing your own repairs or if you’re unable to rectify the issue using our instructions, you must contact a professional pool builders as soon as possible. Your pool could be experiencing a more serious issue.

 

Comments
    comment
    Author